Nxg-technology NX-C8.3-P User Manual download pdf (Page 2)

(Continued from front)

. See Fig. 6. With the speaker wire attached to the speaker, slide

he speaker up inside the cut-out hole. Center the speaker in the

ut-out hole and turn the four locking screws clockwise until the

speaker is drawn up snugly to the wall board from behind, clamping

the speaker in place. Try to tighten each screw equally. Replace the

speaker grill by gently pressing it into place.

New Construction (A)

Note: Use of optional new construction rough-in bracket kits will

not only save time but will also enhance the sound quality of your

installed speakers. (See rough-in kit installation manual for mounting

instructions when using kits.)

New Construction (B)

(Installation without use of new construction rough-in brackets.)

1. Determine speaker locations and mark them on your plans for

future reference.

2. If possible, run speaker wires after HVAC and electrical wiring is

in place.

3. Secure speaker wires in place along the run with insulated staples

only and be careful not to pierce the wire’s insulation. Allow a bit of

slack for expansion of building materials.

4. Needless to say, the actual speakers should not be installed until

the wall board is in place. In the meantime, leave several feet of wire

coiled up and secured at the back side of the mounting hole.

5. To complete the installation follow steps 2 through 5 above.

FIG. 6

16648 North 94th Street • Scottsdale,

85260

1-800-733-0008 www

.nxgtech.com

NXG Pro Series Three -Year Limited Warranty

If the NXG Pro Series speaker system proves to be defective in workmanship or materials within

three years from the date of the original customer’s purchase, we will, at our option, repair or

replace the defective product.

Limitation of Implied Warranties

Any implied warranties, including warranties of merchantability and fitness for a particular purpose,

are limited in duration to the length of this warranty.

Exclusion of Certain Damages

NXG’

s liability for any defective product is limited to repair or replacement of the product at our

our option. NXG shall not be liable for incidental or consequential damages of any kind or character

because of product defects. Some states do not allow limitations on how long an implied warranty

lasts and/or do not allow the exclusion or limitation of incidental or consequential damages, so the

above limitations and exclusions may not apply.

This Warranty Does Not Cover:

• Damage caused by abuse, accident, misuse, negligence, or improper operation.

• Any product whose serial number has been altered, defaced, or removed.

• Products that have been altered or modified.

• Normal wear and maintenance.

• Damages caused by shipping. (All claims for shipping damage must be made with

the carrier.)

Warranty Service

arranty service must be performed by an authorized service center

, usually an NXG speaker

systems dealer or its authorized agent. You may obtain a list of authorized service centers by con-

tacting NXG.

All warranty repairs must be accompanied by the original bill of sales. No other doc

ument is acceptable or is required.

This warranty gives you specific legal rights, and you may also

have other rights which vary from state to state.

NXG reserves the right to revise speaker system

specifications without notice.

Operational Check

After making all connections, it’s a good idea to make sure every-

thing is working properly. Turn on your surround or stereo system,

making sure the volume control is turned down and that the balance

control is in the center position. Activate a musical or movie source

such as FM, a CD or DVD player

. Gently turn up the volume, you

should hear sound coming from your new NXG speakers. If no

sound is heard from any or all speakers, switch off the system

immediately and check for open or loose connections, wrong polar

ity or shorts, or proper source selection.

NX-C8.3-P Specifications

Maximum Power Handling: 5 - 150 watts

Sensitivity: 90dB @ 1 watt/1 meter

Frequency Response: 35 Hz-22,000 Hz

Driver Complement:

8˝ (204mm) metallic-anodized, graphite-filled, injection-molded RCT

cone woofer with rubber surround

˝ (63 mm) metallic-anodized, polycarbonate cone midrange

1˝ (25mm) minimum diffraction, pivoting, fluid-cooled, high tenacity

teteron dome tweeter

Impedance: 8 ohms nominal, 6 ohms minimum

Grille: Corrosion-resistant powder coated aluminum

Overall Dimensions (Diameter x Depth): 10

˝ x 4˝ D (273 mm x 102 mm)

Required Ceiling Cutout: 9

˝ (241 mm) diameter

FIG. 5

1 2

Comments to this Manuals

No comments

Nxg-technology NX-C8.3-P User Manual Page 2

Comments to this Manuals

Related products and manuals for Acoustics Nxg-technology NX-C8.3-P